Changing Date & Time - Norstar Phone System

Download these instructions in PDF format

Once you're in administration mode, the function of some of the buttons on your phone will change, as labeled below.  Once you exit programming mode, the function of the buttons will return to normal. 

• To enter into administration Mode press the ‘Feature; button and enter **266344
• At the password prompt hit 266344
• Press the ‘Next’ button (illustrated below) until “Time & Date” displays on your screen.
• Press ‘Show’ and follow directions below.

To Change the Time:
1. Press the CHANGE softkey     Display will read: "Hour:
2. Press the CHANGE softkey         Display will read: "Hour: _ "
3. Enter the new HOUR. (in 24-hour format - Ex.: 5:00pm = 17:00.     Display will then read the new Hour programmed.
4. Press NEXT     Display will read: "Minutes: # # "
5. Press the CHANGE softkey       Display will read: "Minutes": _ "
6. Enter the new MINUTES.

To Change the Date:
1. Press NEXT      Display will read: "Date DD MM YY"
2. Press the CHANGE softkey     Display will read: "Year: # # "
3. Press the CHANGE softkey, (If the year is incorrect)     Display will read: "Year: _ "
4. Enter the new YEAR        Display will then read the new Year programmed.
5. Press NEXT       Display will read: "Month: # # "
6. Press the CHANGE softkey, (If the month is incorrect)      Display will read: "Month: _ "
7. Enter the new MONTH      Display will then read the new Month programmed
8. Press NEXT     Display will read: "Month: # # "
9. Press the CHANGE softkey, (If the day is incorrect)     Display will read: "Day: _ "
10. Enter the new DAY     Display will then read the new Day programmed

* If this Time/Date procedure does not work, then you have an older Software Revision.

Download these instructions in PDF format